SpletThe wall surface must be dry and smooth. To ensure proper adhesion of the Swan Corporation product, the wall surface must be sealed with a water or oil-based primer/sealer. After the primer/sealer is completely dry, complete the installation following the instructions in this manual. 800-325-7008. 9. Spleta. With a level and a pencil, and working out from the corner, draw a line that will enable you to properly position the mounting bracket. 800-325-7008 7 The Swan Corporation – …
LIMITED WARRANTY INFORMATION
SpletThe Swanstone SS-29 Installation Kit (an accessory –– p.3) contains the four tubes of adhesive, one tube of caulk, and one roll of pressure sensitive tape needed for installation. This kit is suggested for installing the SS-60-3, SS-72-3 and SSIT-60-3. To mount individual Swanstone wall panels, the SS-72 installation kit will be needed. http://pdf.lowes.com/installationguides/671037117063_install.pdf brg physicians group
Swan KS00018RB.168 Installation Guide
SpletSwanstone manuals. The installation of this product can of our product(s). The warnings and require using power tools. Do not use power tools without instructions in this … SpletThe Swan Corporation – Swanstone 6 800-325-7008 Installation Procedure 2. Use 2-1/2” to 3” long #12 drywall screws to attach the 2 x 6 supports to the stud wall, as shown. b. Using the mounting bracket as a template, position the bolt holes over the … http://pdf.lowes.com/installationguides/671037342571_install.pdf brg phones